 |
Accessories for Perforated and Bolted Rung Type Ladder Cable Trays |
|
| 1. Earth Flat Clamp for Ladder Cable Trays |
| Features |
| • |
To avoid welding of Earthing Flats inside the Ladder Tray thus saving space and preventing load and acting as a reinforcement instead. |
| • |
Developed for Delhi International Airport (HVAC Project) |
|
|
 |
|
|
| 2. Sleeve Coupler for Ladder Cable Trays and Perforated Cable Trays |
| Features |
| • |
Used as reinforcement when support span between Ladder Trays or is more or when Ladder Tray/ Perforated Cable Tray sizes exceed 750mm width. (available as an option) |
|
|
 |
|
|
| 3. Sleeve Coupler with Rung for Ladder Cable Trays |
| Features |
| • |
Used to bridge gaps (Upto 200mm) between 2 Ladder Cable Trays thus eradicating the need to cut a full length Ladder Cable Tray for the same application. |
| • |
Developed for Symantec Pune (Server Room). |
|
|
|
|
|
| 4. Extra Long Couplers for Ladder Cable Trays. |
| Features |
| • |
Used when the support span between Ladder Cable Trays is more. |
| • |
Developed for Hansen Drives Chennai |
|
|
|
|
|
| 5. Adjustable Vertical Couplers for Ladder and Perforated Cable Trays. |
| Features |
| • |
Used for minor degree offsets in the upward or downward direction for Cable Trays |
|
|
 |
|
|
| 6. Adjustable Horizontal Couplers for Ladder & Perforated Cable Trays |
| Features |
| • |
Used for minor degree offsets in the left or the right direction for Cable Trays. |
|
|
|
|
|
| 7. Hook Clamp for Ladder Cable Tray |
| Features |
| • |
To hold cables onto the Rung of Bolted Rung Type Ladder Cable Tray™. |
|
|
 |
|
|
| 8. Split Clamp for Ladder Cable Tray. |
| Features |
| • |
To hold cables onto the C- Strut inserted in place of Rung of Ladder Tray. |
|
|
 |
|
|
| 9. Cable Binder for Perforated & Ladder Cable Trays |
| Features |
| • |
To bind single cables or a bunch of cables onto Rung of Ladder Tray or Perforated Cable Tray. |
|
|
|
|
|
| 10. Hold Down Clamp for Perforated Cable Tray. |
| Features |
| • |
To hold the Perforated Cable Tray onto bottom support in the form of Punched Angle. |
|
|
 |
|
|
| 11. Hold Down Clamp for Ladder Cable Tray: |
| Features |
| • |
To hold the Ladder Cable Tray onto bottom support in the form of Punched Angle. |
|
|
 |
|
|
| 12. Covers for Perforated & Ladder Cable Trays |
| Features |
| • |
Used to shield cables on Perforated Cable Trays as well as Ladder Cable Trays. |
| • |
Covers shall be of Pregalvanised Finish (for Hot Dip Galvanized Cable Trays), Powder Coated (Stainless Steel & Aluminum also available). |
| • |
Covers shall be Flat or Domed Shape, |
|
|
|
|
|
| 13. Offset Reducers for Perforated and Ladder Cable Trays |
| Features |
| • |
Used instead of fabricated reducers when reduction in Cable Tray sizes is up to 300mm. |
| • |
Economical as compared to a fabricated reducer. |
|
|
|
|
|
| 14. Clamp to fix Raceway on to Side Rail of Ladder Tray. |
| Features |
| • |
Special Clamp which is used to run Ladder Cable Trays and Trunking on the same platform. |
| • |
Developed for Microsoft Hyderabad (Server Room). |
| • |
Special Design developed which enabled Ladder Cable Trays and Trunking to run on the same platform. |
|
|
|
|
